VanShade Push Window 900 x 500 - Sliding Door (L2H2 → L4H3 vans) - With blind and mosquito net

The VanShade is the push window for privacy. Its dark-tinted double glazing lets in 30% of daylight while keeping the inside discreet, its rounded corners follow the lines of the van, and the blackout blind closes it off completely at night. Everything you need to fit it is in the box.

Choosing the right size

• The size in the product name is the cut-out size, written width × height. A 900 × 500 window needs an opening 900 mm wide and 500 mm high.
• Overall exterior size is 3 cm larger on each axis.
• Not sure which size fits? Send us a photo of the panel. Technical advice is free.

💡 Good to know: only the cut-out size matters when checking whether a window fits your vehicle. The interior finishing frame sits proud of the wall — it dresses the edges of the opening without needing any extra room.

Maximum window size by vehicle

The largest cut-out that normally fits, in mm.

¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter

Maximums are indicative — ribs and reinforcements vary between model years and conversions. Measure your own panel before ordering, or send us a photo and we will confirm.

Prefer a brighter interior? See the VanLight (light tint, 70% light transmission). Prefer square corners? See the VanSquare.

⁉️ Still unsure? Download our window guide: PDF (available in 6 languages)

Why our customers love the VanShade

• Privacy without living in the dark: daylight gets in, the inside stays discreet
• Total darkness at night: the blackout blind closes the window off completely
• Fresh air without insects: three opening positions, with the mosquito net always in place
• A factory-fitted look: the rounded corners follow the body lines, and the interior frame hides the cut-out
• Fitted in about an hour: step-by-step guide included, and our team answers during the installation

What's in the box

• 1 × VanShade push window
• 1 × Reinforced aluminium mounting counter-frame
• 1 × Interior finishing frame with blackout blind and mosquito net
• 1 × Full set of screws
• 1 × Step-by-step installation guide

What you will need

• One tube of Sikaflex 265 per window
• Wooden battens or a wooden frame, 25 mm thick minimum (recommended on a panel van)
• A jigsaw
• A cordless drill/driver

Average installation time: about 1 hour.

Frequently asked questions

Will it fit the curved wall of a panel van?
Yes. The reinforced aluminium counter-frame works on curved walls (panel vans) as well as flat ones (motorhomes, caravans). The small gap left on a curved wall is taken up by the Sikaflex.

Is it road legal?
Yes — ECE R43. It can be fitted without manufacturer approval across Europe, in the UK and in Switzerland, and it passes vehicle inspection in the UK (VCA) and across Europe (e.g. VASP in France, TÜV in Germany, ITV in Spain).

How do I pick the right size?
Mark the cut-out dimensions on the panel where you want the window. If nothing obstructs that area — ribs, cables, conduit — you can fit it.

Downloads

• Fitting instructions (PDF English)
• Approval certificate (CE / ECE R43)

A question or a doubt?
Our France-based technical team answers within 24 hours, before you buy and while you fit it.