VanSlide sliding window - With blind and mosquito net

The VanSlide is the sliding window for places where a push window cannot open: behind a sliding door, under a roof ladder, or anywhere the window must stay flush with the bodywork. Dark-tinted acrylic, black aluminium frame, a lock on the inside and a blackout blind for full darkness at night. Everything you need to fit it is in the box.

Choosing the right size

• The size in the product name is the cut-out size, written width × height. A 700 × 400 window needs an opening 700 mm wide and 400 mm high.
• Overall exterior size is 3 cm larger on each axis.
• Not sure which size fits? Send us a photo of the panel. Technical advice is free.

💡 Good to know: only the cut-out size matters when checking whether a window fits your vehicle. The interior finishing frame sits proud of the wall — it dresses the edges of the opening without needing any extra room.

Maximum window size by vehicle

The largest cut-out that normally fits, in mm.

¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter

Maximums are indicative — ribs and reinforcements vary between model years and conversions. Measure your own panel before ordering, or send us a photo and we will confirm.

Want double glazing and more light? See the VanSlide+ (light tint, 70% light transmission). Prefer square corners? See the VanSlide Square. Need a window that opens outwards? See the VanShade push window.

⁉️ Still unsure? Download our window guide: PDF (available in 6 languages)

Why our customers love the VanSlide

• Opens without sticking out: no clash with a sliding door, a ladder or a passer-by
• Secure when parked: lock it from the inside, even half-open
• Privacy without living in the dark: daylight gets in, the inside stays discreet
• Total darkness at night: the blackout blind closes the window off completely
• Fitted in about an hour: step-by-step guide included, and our team answers during the installation

What's in the box

• 1 × VanSlide sliding window
• 1 × Reinforced aluminium mounting counter-frame
• 1 × Interior finishing frame with blackout blind and mosquito net
• 1 × Full set of screws
• 1 × Step-by-step installation guide

What you will need

• One tube of Sikaflex 265 per window
• Wooden battens or a wooden frame, 25 mm thick minimum (recommended on a panel van)
• A jigsaw
• A cordless drill/driver

Average installation time: about 1 hour.

Frequently asked questions

Sliding or push window: which one should I choose?
A sliding window opens without sticking out, so it is the safe choice behind a sliding door, under a ladder or along a walkway. A push window opens wider and lets in more air when it rains.

Will it fit the curved wall of a panel van?
Yes. The reinforced aluminium counter-frame works on curved walls (panel vans) as well as flat ones (motorhomes, caravans). The small gap left on a curved wall is taken up by the Sikaflex.

Is it road legal?
Yes — ECE R43. It can be fitted without manufacturer approval across Europe, in the UK and in Switzerland, and it passes vehicle inspection in the UK (VCA) and across Europe (e.g. VASP in France, TÜV in Germany, ITV in Spain).

How do I pick the right size?
Mark the cut-out dimensions on the panel where you want the window. If nothing obstructs that area — ribs, cables, conduit — you can fit it.

Downloads

• Fitting instructions (PDF English)
• Approval certificate (CE / ECE R43)

A question or a doubt?
Our France-based technical team answers within 24 hours, before you buy and while you fit it.