VanSlide+ sliding window - With blind and mosquito net

The VanSlide+ is the double-glazed version of our sliding window. Its light grey glazing keeps the inside bright, the two acrylic panes insulate against cold and condensation, and the pane slides inside the frame instead of swinging out, so nothing sticks out of the bodywork. A central lock and a blackout blind complete it. Everything you need to fit it is in the box.

Choosing the right size

• The size in the product name is the cut-out size, written width × height. A 700 × 400 window needs an opening 700 mm wide and 400 mm high.
• Overall exterior size is 3 cm larger on each axis.
• Not sure which size fits? Send us a photo of the panel. Technical advice is free.

💡 Good to know: only the cut-out size matters when checking whether a window fits your vehicle. The interior finishing frame sits proud of the wall — it dresses the edges of the opening without needing any extra room.

Maximum window size by vehicle

The largest cut-out that normally fits, in mm.

¹ Master, Movano, NV400 · ² Ducato, Jumper, Boxer, Sprinter, Crafter

Maximums are indicative — ribs and reinforcements vary between model years and conversions. Measure your own panel before ordering, or send us a photo and we will confirm. The VanSlide+ is made up to 1100 × 550.

Prefer more privacy? See the VanSlide (dark tint, 30% light transmission). Prefer square corners? See the VanSlide Square. Need a window that opens outwards? See the VanLight push window, with the same light tint.

⁉️ Still unsure? Download our window guide: PDF (available in 6 languages)

Why our customers love the VanSlide+

• A bright interior: more than twice the daylight of a dark-tinted window, which changes how a small van feels on a grey day
• A warmer van in winter: double glazing means less cold and less condensation on the window
• Ventilation you can leave open: the pane slides inside the frame, so nothing catches on a branch or a fuel pump
• Secure when parked: the central lock keeps the window ajar while you are away from the van
• Fitted in about an hour: step-by-step guide included, and our team answers during the installation

What's in the box

• 1 × VanSlide+ sliding window
• 1 × Reinforced aluminium mounting counter-frame
• 1 × Interior finishing frame, with blackout blind and mosquito net built in
• 1 × Full set of screws
• 1 × Step-by-step installation guide
• 1 × ECE R43 approval certificate

What you will need

• One tube of Sikaflex 265 per window
• Wooden battens or a wooden frame, 25 mm thick minimum (recommended on a panel van)
• A jigsaw
• A cordless drill/driver

Average installation time: about 1 hour.

Frequently asked questions

VanSlide or VanSlide+: what is the difference?
The VanSlide+ has double glazing, for better insulation and less condensation, and a light grey tint that lets in 70% of daylight. The VanSlide has a dark tint (30%) for more privacy.

Will it fit the curved wall of a panel van?
Yes. The reinforced aluminium counter-frame works on curved walls (panel vans) as well as flat ones (motorhomes, caravans). The small gap left on a curved wall is taken up by the Sikaflex.

Is it road legal?
Yes — ECE R43. It can be fitted without manufacturer approval across Europe, in the UK and in Switzerland, and it passes vehicle inspection in the UK (VCA) and across Europe (e.g. VASP in France, TÜV in Germany, ITV in Spain).

How do I pick the right size?
Mark the cut-out dimensions on the panel where you want the window. If nothing obstructs that area — ribs, cables, conduit — you can fit it.

Downloads

• Fitting instructions (PDF English)
• Approval certificate (CE / ECE R43)

A question or a doubt?
Our France-based technical team answers within 24 hours, before you buy and while you fit it.