Swivel cassette toilet with 12V flush - for campervans and motorhomes

• Toilet — the toilet with its cassette and its service hatch.
• Toilet + shower tray — the same set with an 80 × 70 cm shower tray shaped to take the toilet, for a complete wet room. Choose toilet on the right or toilet on the left, depending on where the toilet sits on the tray.

• Cassette toilet (this page) — a fixed installation, a 12 V flush and emptying from outside. The comfort of a real bathroom.
• Sealed bag toilet — no water, no chemicals, no dump point: made for travelling off-grid.
• Portable toilet — no installation at all, the simplest and most affordable option.

💡 Good to know: the flush draws from the vehicle's pressurised water circuit (0.35 to 0.70 bar). On a circuit without pressure, it works with an external 12 V flush pump — the wiring for both cases is in the manual.

• Floor space of at least 370 × 577 mm — 421 mm wide with the bowl turned
• 838 mm of clear height to raise the seat
• A flat exterior wall, 30 to 50 mm thick, for the service hatch cut-out (349 × 297 mm)
• A 12 V supply nearby
• A water supply: pressurised circuit at 0.35 to 0.70 bar, or an external pump

Not sure? Send us a photo of the location and we answer within 24 hours.

• 1 × Swivel cassette toilet
• 1 × 17.2 L cassette on wheels
• 1 × Exterior service hatch, white and paintable
• 1 × Set of keys
• 1 × Vent hose and its flange
• 1 × Wall bracket, screws and trim caps
• 1 × Dose of breakdown fluid for the first use
• 1 × 80 × 70 cm shower tray (shower tray versions only)

What you will need

• A connection to the vehicle's 12 V circuit
• A connection to the pressurised water circuit, or an external 12 V flush pump
• A cut-out in the wall for the service hatch (wall 30 to 50 mm thick), sealed with Sikaflex 552 AT

• Before each trip, pour about 2 L of water and one dose of fluid into the cassette through the pouring spout.
• Clean the bowl with a soft cloth, without harsh household products, which would damage the blade seal.
• Never drive with water in the bowl, or with a cassette more than three-quarters full.
• In winter, in an unheated vehicle, drain the cassette and the water circuit.

• Vehicles: campervans and motorhomes (fixed installation).
• Service hatch: 379 × 331 × 70 mm, for walls 30 to 50 mm thick.
• Flush: 12 V DC, fused; pressurised water circuit at 0.35 to 0.70 bar (8 bar max.), or an external 12 V flush pump.
• Installed size (H × W × D): 538 × 370 × 577 mm; 538 × 421 × 528 mm with the bowl turned.
• Shower tray packs: 80 × 70 cm tray, toilet on the right (Pack R) or on the left (Pack L).